Table-Gauge offline diameter measurement systems

Table-Gauge.XY and Table-Gauge.X gauges are general purpose gauges for benchtop or offline measurement of diameter, ovality for pins, turned parts, drawn wire, dies, wire, fibre or extrusions. These checks can be done quickly and easily and independent of conditions or environment, thanks to the NO-VAR thermal compensation protocols.

Table-Gauge offline diameter measurement comes equipped with the DM-200 display panel, with colour-coded display based on tolerances, and IR remote control for programming.

Bench top laser micrometer and laser measurement made quick, accurate and easy

  • Diameter 0.03 to 78 mm, depending on model
  • Resolution from 0.01 µm
  • Repeatability from 0.03 µm
  • Tolerance checking
  • Efficient glass logic for transparent products
  • Accessories available including fixturing to hold the part


  • 3-year warranty
  • Low sensitivity to vibration owing to exceptional single scan repeatability
  • Excellent dust resistance
  • Easy-to-use product library with programmed tolerances
  • In-built thermal compensation and self-mastering protocols
  • Networking ability via Ethernet, even for multiple gauges, to a single computer program
  • Data-logging with PC software
  • Unique expertise – as a specialist laser micrometer manufacturer, Aeroel have unsurpassed know-how and experience in laser diameter measurement

The Table-Gauge bench top laser micrometer is just one of a number of offline laser measurement systems supplied by Scantron. If this doesn’t suit your needs, contact us to discuss your bespoke requirements.

Contact Our Sales Team

Contact our sales team via email regarding this product: +44 (0)1823 333343

Email UsMake An Enquiry
Dual Axis
Gauge ModelXLS13XY/1500/AXLS13XY/1500/BXLS35XY/1500/B
Measuring field (mm)13 x 134 x 435 x 35
Measurable Diameters (mm)0.1 – 100.05 – 30.2 – 32
Resolution (selectable)10/1/0.1/0.01
Linearity (centred) (µm)±0.5
Linearity (Reduced Field) (µm)±1±0.5±1.5
Repeatability (T=1s, ±2σ) (µm)±0.04±0.02±0.15
Beam Spot Size (mm)0.1 x 40.05 x 0.10.2 x 0.1
Scanning Frequency (Hz)1500(X) x 1500
Single Axis
Gauge ModelXLS/40/1500/AXLS80/1500/A
Measuring field (mm)4080
Measurable Diameters (mm)0.1-380.75-78
Resolution (selectable)10/1/0.1/0.01
Linearity (centred) (µm)±0.5±1
Linearity (Reduced Field) (µm)±0.5±2
Repeatability (T=1s, ±2σ) (µm)±0.07±0.2
Beam Spot Size (mm)0.08 x 20.4 x 3.5
Scanning Frequency (Hz)15001500

Table-Guage by Aeroel is a specialist bench top laser micrometer for diameter measurement. It provides a number of benefits and is feature-rich:

  • Multicolor LED display to show the measured values and to allow system programming through the IR remote control
  • The measured and programmed data can be scrolled on the display using the remote control or the SET key on the display panel
  • It is possible to save in memory, in a Product Library, up to 1000 different sets of programmed parameters, for each specific part to be checked
  • The display colour will change corresponding to the tolerance status of the shown variable (green, orange or red)
  • The display unit includes 4 programmable alarm output lines to drive additional external devices
  • Simple and quick programming using the remote control keys and the messages on the display
  • Offset function for user re-mastering
  • Selectable Measuring Units inch/mm and Resolution (to 0.01μm / 1×10-6 inch)
  • Wire samples
  • Fibre optics
  • Magnet wire
  • Ground parts
  • Bearings
  • Hydraulic components
  • V blocks to hold the part
  • Linear slide and the gauge-base to translate the part
  • Fixed V blocks to be mounted on the slide
  • Centers and cones to hold the part
  • Foot switch
  • Hand-held programming terminal
  • GageXcom software for PC communication.
  • Hand driven rotating fixture (for the XLS13XY only)